
NOVESKE GEN 4 11.5" COMMANDO EXTRA THICC DDF PISTOL 5.56
Noveske RifleworksNOVESKE DDF (DISRUPTIVE DEEP FLUTE)
Barrel:
11.5” 5.56mm 416R Stainless with 1:7 twist
Disruptive Deep Flutes cool 36% faster than standard contour
Individual serialized barrel for QC purposes
Hand polished Noveske Match Chamber
Carbine gas tube length
Noveske marked gas block: Low profile, .9375” journal, pinned to barrel
M4 barrel extension w/extended hand polished feed ramps
Noveske Pig Pen suppressor compatible muzzle device
Upper Receiver:
Noveske 4th Generation precision machined billet receiver from 7075-T6
aluminum w/extended feed ramps
Hardcoat type III anodizing, then Cerakote ceramic coating for superior finish
longevity
Black nitride Noveske marked forward assist
Noveske Love Handle ambidextrous charging handle
Featuring anti-rotation interface with handguard
Phosphate coated bolt carrier, full auto compatible, chrome lined carrier bore and key
Properly staked grade 8 American made gas key bolts
Phosphate bolt made from Carpenter 158 heat treated steel MPI tested (magnetic
particle inspected)
Handguard:
4th Generation NSR-10.75” (M-LOK) Free Floating Handguard
Featuring M-LOK mounting positions every 45 degrees with picatinny 1913 top rail
Light weight American made steel barrel nut
The 10.75” handguard with a 11.5” barrel will return a .080” clearance from end of
handguard to barrel thread shoulder. Perfect spacing when you add your favorite
suppressor
Lower Receiver:
Noveske 4th Generation precision machined billet receiver from 7075-T6 aluminum
Oversized flared magazine well
Integrated oversized trigger guard
Ambidextrous bolt release
Ambidextrous magazine release
Badger Ordnance C1 safety selector
Hardcoat type III anodizing, then Cerakote ceramic coating for superior finish
longevity longevity
Properly staked Noveske QD sling mount endplate
Noveske marked takedown and pivot pin
Adjustable tension screw for perfect fit between upper and lower
Geissele Super Dynamic -Enhanced (SD-E) Trigger
6 Position Mil Spec Impact extruded carbine extension
H2 buffer with carbine action spring
Furniture:
Grip: B5 Systems type 22 grip
Sights: Magpul MBUS Pro steel front and rear adjustable sights
Extra information:
Overall length with a collapsed brace to the end of the flash hider: 27 ¾”
6.5 lbs dry weight
Comes with one 30 round Gen 3 PMAG
The Disruptive Deep Fluting (DDF) is an external barrel structure designed to significantly reduce primary (blast compression and expansion) and secondary (sinusoidal resonance) wave events in barrels, improving accuracy, reducing heat, and extending barrel life. Using data from the 2024 TACOM HO Finite Element Analysis (FEA) study. Noveske’s Combat Systems Development & Support program launched an R&D project. The goal was to determine the optimal surface area per linear inch to effectively disrupt these wave events while maintaining the lightweight barrel contour already used by U.S. Special Operations personnel.
DDF Specs
1) Seven (7) Longitudinal Flutes
2) Standardized .980″ Outer Diameter, Minimum Bore Wall Thickness, and .125″ of rounded cut at depth
3) .250″ Maximum Width
4) Fluted maximum length of barrel, minus 1.050″ break for a .9375″ gas block journal
5) Total Surface Area per Linear Inch of Fluted Barrel:
a) .224 Bore Barrel – 4.0487sain (vs 3.06sain Standard Contour) +32.31%
b).243 Bore Barrel – 4.0891sain (vs 3.12sain Standard Contour) +31.06%
c).264 Bore Barrel – 4.1446sqin (vs 3.19sqin Standard Contour) +29.92%
d).308 Bore Barrel – 4.2362sqin (vs 3.32sqin Standard Contour) +27.59%
6) More accurate due to decreased sinusoidal resonance
(vibration effecting the stability of the bullet)
7) 25%-40% increase in cooling speed
8) 8%- 13% decrease in weight compared to our standard contour
Accuracy
Constriction of the barrel’s Second Moment of Area (axial flexion) by increasing the barrel’s moment of inertia (structural/material resistance to flexion), vastly reduces load irregularities translated from the barrel to the projectile in accelerated transit down the rifled bore. This reduction in muti-axis wave mode functions allow the longitudinal axis of the projectile to remain better aligned with its velocity vector, thus decreasing precessional instability and increasing trajectory resilience.
Thermal Damping
As a byproduct of the drastic reduction in vibration facilitated by the Disruptive Deep Fluting, transfer of kinetic energy into thermal energy as Variable Heat is reduced by 10%, while the cooling speed of the barrel is increased by 25-40% internal temperature at the throat.
Barrel-life Increase
Material failure in barrels is caused by the exertion of a force impulse wherein the flexion derived by that force exceeds the material stiffness provided by its temperature moment. The disruptive deep fluting reduces both the flexion imposed on the barrel by the accelerated force impulse and maintains a higher material stiffness due to its ability to maintain a lower temperature, thus increasing barrel life well beyond that of non structured barrels of the same given metallurgy.
- FFL:
- YES